Amazon & Marketplaces
Reviewed 27 October 2026
The short answer
Amazon supplement verification can involve three separate checks: product compliance, manufacturing or testing evidence, and supply-chain authenticity. For notified ASINs in the direct product validation workflow, an Amazon-authorized TIC provider validates the evidence and reports to Amazon. A supplier invoice, a laboratory report and a GMP certificate answer different questions. Start with the exact notice and marketplace, then assemble the evidence for that request.
Who this article is for
Supplement brand owners, private-label sellers, importers and quality teams preparing an Amazon listing or responding to a compliance request, rejected document package or suppressed ASIN.
Key takeaways
Read the rejection literally: supplier verification, GMP evidence, testing and label compliance need different responses.
Use the authorized provider workflow for a TIC request; ordinary document uploads do not replace it.
Confirm the required scope before commissioning new tests or assuming every variant is covered.
Treat Amazon.com and Amazon.ca as separate market-access reviews.
Make every document traceable to the relevant product, legal entity, facility and, where applicable, lot.
Amazon supplement requirements: identify the request first
A rejected supplement listing does not always mean the product failed laboratory testing. Amazon may be unable to verify a supplier, connect the seller to the brand owner, validate manufacturing evidence or reconcile the label with the listing. Those are different problems. Our recommended starting point is a short request map: what Amazon asked for, which ASINs are affected, who owns each missing document and the deadline.
Supply-chain or Human Ingestible approval: establish the seller, brand and supplier relationships requested in the notice.
Manufacturing verification: establish the relevant facility and acceptable current GMP evidence.
Product testing or label review: establish the correct product, test scope, results and claims.
Country-specific market access: establish the legal basis for sale in the destination market.

Illustrative stock photograph. Testing is one part of the evidence package; it cannot establish who supplied whom.
Amazon.com versus Amazon.ca: what changes?
United States: dietary supplement verification
Amazon’s U.S. framework requires current third-party cGMP evidence for dietary supplements. Its official compliance Q&A distinguishes this from additional laboratory testing for sexual enhancement, weight management, sports nutrition, bodybuilding and joint health products. Other supplements generally follow GMP validation under that framework, subject to the specific notice and any additional review. Do not buy the same test panel for every SKU without confirming scope. [3, 6]
Amazon also evaluates product presentation. Ingredient names, quantities and serving information should align across the physical label and listing. Claims, dosing instructions and marketing can affect classification; a Nutrition Facts panel alone does not put a product outside the supplement policy. FDA does not approve dietary supplements for safety and effectiveness before marketing, so “FDA-approved supplement” is not a shortcut to verification. [1, 7]
Canada: product licensing, labels and import arrangements
For a product classified as a Canadian natural health product, confirm the product licence and NPN, or DIN-HM for a homeopathic medicine, and check the marketed product against its authorized terms. A U.S. listing or test report does not provide that licence. Canadian labelling requirements include specified information in English and French. Commercial importation also requires the appropriate importer site licence and foreign-site arrangements. [8–10]
For Amazon.ca, read the Canadian account’s actual request and follow its submission route. Do not import the U.S. category list, testing panel or deadline into a Canadian case by assumption. If the product is a food or supplemented food rather than an NHP, resolve that classification before preparing an NPN response. The Canadian legal requirements above are separate from Amazon’s case-specific evidence requirements.
What a TIC provider does—and what it does not do
TIC stands for testing, inspection and certification. For ASINs notified under direct product validation, Amazon requires an authorized provider to verify the relevant evidence. The provider reports the result directly to Amazon. Existing laboratory reports may be evaluated, including reports from another laboratory; acceptance depends on the provider’s validation. Select from the providers offered for the affected product and marketplace. [2]
Separate the responsibilities before starting. The seller coordinates the case and accurate listing information. The manufacturer supplies authentic facility and production evidence. A laboratory performs agreed analyses. An auditor or certification body assesses the facility. The authorized TIC provider completes the required validation. Amazon decides marketplace eligibility. A consultant can organize and resolve gaps without replacing any of those roles.
The Amazon TIC process, step by step
1. Open the affected ASIN notice
In Seller Central, the route commonly runs through Performance → Account Health → Policy Compliance → Food and Product Safety Issues. Open the affected product’s Next steps or Submit action, then Verify your product where shown. Interface wording can change. Record the ASIN, marketplace, request date, deadline and precise requirement before proceeding. [2]
2. Select the provider and agree the scope
Use the provider selection shown in the request. Before accepting a quotation, ask which ASINs it covers, whether the task is GMP validation, report review or new testing, what samples are needed, what existing evidence can be used, and who reports the result. Obtain confirmation of exclusions and any retesting charges. A low quotation is not comparable if it omits part of the required work.
3. Assemble a consistent evidence file
Use one product-and-entity register as your reference. Record the seller’s legal name, brand owner, direct supplier, actual manufacturing site, ASIN, UPC or GTIN, product name, strength, format and pack size. Add lot details wherever samples or reports are lot-specific. Keep explanatory notes alongside authentic source documents so reviewers can follow legitimate naming differences without altered originals.
4. Complete the required review or testing
Provide documents and samples according to the provider’s instructions. NSF describes reviewing manufacturing certificates, label images and test results before reporting a pass/fail result. Its pricing depends on product and testing scope; grouping similar products is a provider-controlled decision. Keep written confirmation of the ASINs covered rather than assuming every flavour or size is included. [5]
5. Confirm transmission and follow the outcome
Save the provider order number and submission confirmation, then monitor the affected ASIN. If the result has been transmitted but the listing remains inactive, reconcile the ASIN and case references and check for a separate outstanding requirement. Completion of one review does not show that every other restriction has been resolved. Use the actual notice for deadlines rather than a generic 30- or 90-day estimate.
COA, test report and GMP certificate: different evidence
A certificate of analysis summarizes results against specifications for an identified material or product. A raw-material COA supports that material; it does not establish the results for a finished capsule, powder or strip. A detailed laboratory report may provide the analytical methods, limits and other information needed for review. A GMP certificate concerns the manufacturing operation. None of these establishes a commercial supplier relationship by itself.
For U.S. Amazon GMP verification, the accepted evidence must come from an accredited third party and remain current. Amazon’s update excludes internal, private or consulting audits and FDA inspections as substitutes for that certification requirement. Check the certificate’s facility, scope and validity before treating it as usable evidence. [4]
Where testing is required, possible elements include label-claim verification, heavy metals, microbiological contaminants and category-appropriate adulterant or other testing. Agree the methods, limits and sampling plan with the provider for the specific product. A generic “Amazon panel” is not enough detail for a purchasing decision. [11]
Why Amazon asks for your supplier’s supplier
A technical document can introduce an upstream company without proving that it supplied the manufacturer. A reviewer may see a seller connected to one supplier, then a COA issued by a different business with no transaction or authorization linking the two. The useful response is evidence for that missing relationship, in the form and date range the notice requests.
An upstream invoice, contract, delivery record or signed relationship letter may address that gap when permitted by the request. The correct company must issue or sign it. Do not assume a new laboratory report removes the need for supplier evidence. Likewise, a pending trademark application should be described accurately rather than presented as an issued registration. Alternative documents need to be accepted for the actual case.

Illustrative stock photograph, not a photograph of the client engagement described below.
Client example: finding the missing upstream link
In a September 2026 engagement involving a dissolvable supplement product, Kompete reviewed an Amazon Human Ingestible rejection and the previously submitted documents. The direct customer-to-supplier relationship was supported, but raw-material COAs named upstream companies without connecting them to the direct supplier.
The completed first-stage deliverables were a written audit and remediation plan, a manufacturing and supply declaration, an upstream supplier relationship confirmation, brand ownership or seller authorization wording, and a supplier document-request checklist. The instructions identified which party should complete and sign each document and which facility details still needed confirmation.
The audit also separated the supplier-verification issue from the later finished-product testing review. The client accepted this documentation milestone. Amazon approval, completed testing and reinstatement were not established by the records reviewed for this example. Client, brand and supplier identities are omitted.
What to do when a submission is rejected again
Turn the new response into a gap list. For each point, record the reason, the evidence already supplied, what remains missing and the person responsible. A supplier mismatch needs transaction or relationship evidence. An expired certificate needs current acceptable evidence. A failed test needs technical investigation and appropriate corrective action. A listing mismatch needs a consistent, compliant label and listing.
Do not silently edit invoices, test results or certificates to make names match. Ask the issuer to correct errors or provide a genuine explanation for an address change, legal-name variation or trading relationship. Keep previous versions and submission receipts so the next reviewer can understand what changed.
Budget, timing and keeping the file current
Build the budget in separate lines: document review, provider verification, any laboratory work, sampling and shipping, facility audit or certification work, and corrective actions. Request a timeline that distinguishes supplier-document collection, laboratory turnaround, provider review and Amazon’s decision. None of those stages is a reliable substitute for another.
After the review, assign an owner to certificate renewals and changes in formula, manufacturer, site, label or claims. Ask the provider when those changes trigger a new assessment. Keep the final product map, signed records and outcome together so the next request starts from an organized file.
How Kompete can help
Kompete can review your Amazon notice and current documents, identify the missing links, prepare targeted supplier requests, check product and entity consistency, and coordinate testing or provider review where needed. The deliverable should tell you what is missing, who must provide it and the next action for each affected product.
Request an Amazon compliance review. Start with the notice, marketplace and affected ASINs. We can agree a document-sharing route for the supporting files.
Scope note: this guide covers U.S. and Canadian selling considerations. Amazon’s authenticated notice determines the case-specific request and available provider route. The source references below support the policy discussion; the practical checklist is Kompete’s recommended preparation framework, not a universal list of mandatory uploads.
What to prepare
01 — Request file: save the complete notice, rejection history, case reference, marketplace, affected ASINs and stated deadline. Owner: seller.
02 — Product register: connect each ASIN to its brand, product name, SKU, UPC/GTIN, formula version, serving size and pack size. Record the lots relevant to submitted samples or reports. Owner: seller and quality team.
03 — Labels and listing: collect readable photographs of the actual packaging and all panels, plus the title, bullets, description and image claims. Reconcile product names, amounts and warnings. Owner: brand.
04 — Manufacturing evidence: request the current certificate and exact site identity; confirm scope, issuing body and expiry against the provider’s requirements. Owner: manufacturer.
05 — Analytical evidence, where requested: obtain the original finished-product reports, COAs and sample identification. Ask the provider to confirm report acceptability and missing tests before ordering new work. Owner: manufacturer, laboratory and TIC provider.
06 — Supply-chain evidence, where requested: map seller → direct supplier → relevant upstream supplier. Collect genuine invoices, contracts, delivery records or signed relationship evidence that meets the actual request. Owner: each issuing supplier.
07 — Brand and seller identity: establish the legal brand owner and seller entity, current trademark status and any required selling authorization. Owner: brand owner and seller.
08 — Canadian market file, where applicable: reconcile the NPN or DIN-HM and licence terms, Canadian label and importer/site arrangements. Owner: licence holder and importer.
09 — Final reconciliation: flag inconsistent names, addresses, dates, product codes or lot references; obtain issuer corrections or explanations. Preserve the originals. Owner: project coordinator.
10 — Submission and follow-up: use the assigned route, retain the provider or case receipt, record the result for each ASIN and calendar renewal or follow-up actions. Owner: seller.
Frequently asked
What does TIC mean for Amazon supplements?
TIC means testing, inspection and certification. In Amazon’s direct product validation process, an authorized provider evaluates the relevant evidence and sends the verification result to Amazon. The laboratory, facility auditor and TIC provider may have different roles.
Do all supplements need the same Amazon testing panel?
No. Amazon distinguishes GMP verification from additional testing for higher-risk categories. Product ingredients, claims, classification and the individual request affect scope. Agree the required tests with the assigned provider before paying for a panel.
Can I use an existing COA or laboratory report?
Possibly. Ask the authorized provider to assess the report’s identity, methods, scope, accreditation, dates and traceability. A raw-material COA does not demonstrate finished-product results, and no laboratory report proves a missing commercial supply-chain relationship.
Why is Amazon asking for my supplier’s supplier?
The request concerns an upstream link in the supply chain. Identify the exact companies Amazon cannot connect, then obtain genuine relationship or transaction evidence that meets the notice. An invoice, delivery record, contract or signed authorization may be relevant when the request allows it.
Does an NPN satisfy Amazon.com verification?
An NPN establishes Canadian product licensing; it does not replace the U.S. marketplace’s requirements. Equally, acceptance on Amazon.com does not establish Canadian licensing or label compliance.
Can one verification cover several ASINs?
Ask the provider. Related products may share manufacturing evidence, and some programs allow product bracketing. Keep a complete ASIN map and obtain written confirmation of exactly which products, formulations and pack sizes are covered.
How much does Amazon supplement verification cost?
There is no universal price. Separate the provider’s verification fee, any laboratory testing, facility audit work, shipping and consulting. A document audit should establish what is missing before testing or remediation is commissioned.
How long does verification take, and can I keep selling?
The notice and current listing status control your deadline and selling eligibility. Supplier responses, testing and provider review affect completion time. Starting a verification order does not guarantee an extension or immediate reinstatement.
Can Kompete help with a rejected Amazon document package?
Kompete can review the notice, identify documentary gaps, prepare supplier requests and supporting explanations, and coordinate the next steps. Any required third-party verification remains with the authorized provider; Amazon makes the marketplace decision.
Sources
Where we can help
Next step
General guidance only goes so far. Send us the formula, the label, the request or the market, and we will tell you what we would do next.
Review My Amazon Compliance Request
