Manufacturing & Quality
Verified as at 23 September 2026
The short answer
The good manufacturing practices obligations for natural health products sit in the Natural Health Products Regulations. Health Canada's GMP guidance document explains how the Department interprets those obligations and what evidence it expects to see, and it is revised periodically. A gap assessment should therefore work in two columns: what the regulations require you to do, and what the guidance says a compliant approach looks like. Review premises, equipment, personnel, sanitation, operations, quality assurance, stability, records, sterilisation where applicable, and recall reporting, and document both your conclusion and your reasoning.
Who this article is for
Quality and regulatory managers, site licence holders, importers responsible for foreign manufacturers, and operations leads preparing for an audit or a site licence application.
Key takeaways
The regulations create the obligation. The guidance explains how Health Canada interprets it. Treat them as separate columns in your assessment.
Guidance is not optional in practice. Departing from it is defensible only if you can show your alternative meets the regulatory requirement.
Importers carry real obligations. Holding a foreign manufacturer’s certificate is not the same as having evidence you can produce.
Most gaps are documentation gaps. The activity is happening; the record that proves it is missing or unsigned.
Write down your reasoning, not just your conclusion. An assessment without rationale cannot be defended or reused.
Obligation and guidance are not the same thing
This distinction is worth getting right before you start, because it changes how you respond to findings. The good manufacturing practices requirements for natural health products are set out in the Natural Health Products Regulations. Health Canada’s guidance document interprets those requirements and describes the evidence the Department expects. Guidance is revised as practice develops, and it is published alongside the Department’s other natural and non-prescription health product guidance documents. Version 4.0 of GUI-0158 was published on 4 September 2025, took effect on 4 March 2026, and replaced version 3.0. In practical terms: if you diverge from guidance, you need to be able to show that your approach still satisfies the regulation. Divergence without rationale is the weakest position to be in during an audit.
Work through the system area by area
Assess each area against three questions: is there a written procedure, is it being followed, and is there a record that proves it. The areas to cover are premises, equipment, personnel, sanitation, operations, quality assurance, stability, records, sterilisation where it applies, and recall and reporting obligations. Score each one honestly as compliant, partial, or absent, and attach the evidence you actually looked at rather than the evidence you believe exists.
Where gaps cluster
Specifications that exist for finished products but not for every raw material and packaging component.
Supplier qualification carried out informally, with no record of how a supplier was approved or when they were last reviewed.
Training that happens but is not documented against named individuals and specific procedures.
Cleaning validated for the process but not for changeover between products with allergen or potency implications.
Deviations and out-of-specification results handled verbally, with no investigation record and no defined disposition.
Stability programmes run on a development formula or in packaging that is no longer the commercial packaging.
Recall procedures written but never tested, and contact lists that are out of date.
If you import rather than manufacture
Importers frequently underestimate their position. Holding a copy of a foreign manufacturer’s certificate is not the same as being able to demonstrate that the product you placed on the Canadian market was made under good manufacturing practices. You need evidence in your own possession, current, with a scope that covers your dosage format and the specific site that made your batches. Site licensing obligations apply to importing for sale in Canada, and Health Canada’s site licensing pages set out who is captured. Build the evidence requirement into your supply agreement so it arrives with each batch rather than being requested during an inspection.
Turn the assessment into a plan
A gap list is not useful until it has owners and dates. Rank findings by risk to product quality rather than by how easy they are to close, assign each one to a named person, and set a review date. Then keep the assessment as a living document. The value of doing this properly is not the audit result. It is that you know, at any moment, what your documentation can and cannot demonstrate.
What to prepare
The current version of Health Canada’s GMP guidance for natural health products, read in full
Your site licence details and the activities it covers
A complete procedure index, with revision dates and approval signatures
Specifications for finished products, raw materials and packaging components
Supplier qualification records and review dates
Training records mapped to individuals and procedures
Cleaning and changeover validation, including allergen considerations
Batch records for recent production, reviewed for completeness rather than sampled casually
Deviation, out-of-specification and change control records
Stability protocol, data and the link between data and printed expiry dates
Recall procedure, with evidence it has been tested and contacts verified
For importers: current manufacturing evidence for each foreign site, held on file
Frequently asked
Is the GMP guidance legally binding?
The regulations are binding. The guidance describes how Health Canada interprets them and what evidence it expects. If you depart from guidance, you must be able to show your approach meets the regulatory requirement.
Does third-party certification mean we are compliant?
It is useful evidence and often expected by retailers, but it does not replace your own obligations under the regulations, and scope matters. Check that the certificate covers the site and the format in question.
We are an importer, not a manufacturer. Does this apply to us?
Yes. Importing for sale in Canada carries site licensing obligations, and you need to be able to demonstrate the manufacturing conditions behind the product you placed on the market.
How often should we redo the assessment?
Review it when the guidance is revised, when you change site, format or major supplier, and on a set internal cycle so it does not quietly go stale.
Next step
General guidance only goes so far. Send us the formula, the label, the request or the market, and we will tell you what we would do next.
Discuss Your Quality Documentation
